Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Single phase phase separation for rotary phase converter
[ 5 Answers ]
I have a 240V Roto-Phase converter (ARCO Electric model M) in my shop installed by an electrician. A wire came loose last week and while debugging that I started thinking about the way it was wired and confused myself. My understanding of 3 phase power is that each leg is 120 degrees out of phase...
Convert 240 volt 3 phase to 220 volt single phase
[ 2 Answers ]
Hi I have a 3 phase 250 volt 30 amp socket .I want to know if I drop one leg and change the receptacle . Can I plug a 200/230 volt 48/42 amp miller welder in to it ? Do I just wire nut the extra wire or pull it out of the panel ? Thanks mike
I have 480V 60A three phase. What's the voltage and amperage for each phase?
[ 0 Answers ]
For instance, would it be 160V/20A or 160V/60A or how is it calculated? Does the amperage maintain its value or does it change? Thanks in advance for your answers.
I have 480 volt, three phase available. Can I pull 240 volt, single phase off this ?
[ 1 Answers ]
Have available 3 phase, 3 leads plus a ground. Need to run 240 volt, single phase connection off the 3 phase. Is this possible without a step down transformer?
How to go from 200Amps/208V/3 phase to 600Amps/480V/3 phase
[ 2 Answers ]
I am starting a business and have equipment that requires 600Amps/480V/3 phase, but the site I want to rent has only 200Amps/208V/3 phase. Is there anything I can do to get the required power on that site? Any equipment I can buy to achieve this goal? I understand it may be costly. Thank you. View more questions Search
|