Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to lay out a pattern to cut 45 degree angle on a 8 inch pipe
[ 1 Answers ]
I want to cut a 45degree angle on a 8inch steel pipe so that I can put the to 45 degree angles together and weld them. How can this angle be laid out on paper for pattern.Thank you Builderbob27b.
Replace 3" ABS pipe bonded into cast iron cleanout pipe
[ 1 Answers ]
Need to connect new 3" ABS pipe to an old cast iron cleanout pipe just above cement floor. Need to create a new cleanout in 3" ABS that will be 12" above the old cast iron cleanout so that a main sewer line blockage between the main stack & the street sewer some 25 feet away can be removed. Had to...
Put pipe thread on abs to cast iron pipe threads?
[ 3 Answers ]
I have a 1-1/2" cast iron show drain. will attach to 1-1/2" abs male threaded coupling. Do I need to put pipe thread or plummers puty on the threads?
Replace toilet waste pipe: where to cut?
[ 5 Answers ]
Hello- The situation: I am starting a DIY bathroom remodeling that involves only one major transition- moving the toilet approximately 5ft. I have very reasonable access to the plumbing via the basement, and further the toilet continues in the same linear line as its current drain pipe. I am... View more questions Search
|