Ask Experts Questions for FREE Help !
Ask
    Marleyboy's Avatar
    Marleyboy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 22, 2013, 11:24 AM
    L100 won't start
    Battery good lights work, all cables tight
    smearcase's Avatar
    smearcase Posts: 2,392, Reputation: 316
    Ultra Member
    		  
    #2

    Mar 22, 2013, 11:38 AM
    Fresh fuel?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Mar 22, 2013, 04:31 PM
    Hi,
    Voltage to solenoid with switch in Start position? Yes - bad solenoid; no - bad switch circuit(which would be odd with working lights.)
    Peace,
    Clarke
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #4

    Mar 22, 2013, 07:20 PM
    Won't start or won't crank?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L100 won't start [ 2 Answers ]

Been having this problem off and on for the past couple years but today I went out and did some actual troubleshooting. When I turn the key with the choke on and brake depressed the engine will turn maybe once or even just half a turn the make a choking sound. I checked all the gas lines and the...

John deere L100 won't start [ 0 Answers ]

John deere L100 won't start. Key on. No hour indication info in window. Battery checked out. Fuze o'k'. Ideas?

L100 John Deere won't start after removing and replacing the deck [ 2 Answers ]

My L100 tractor was working fine but after I removed the deck to replace a spindle and blades I believed I had replaced everything back where it belonged but when I went to start it I got no response. There is no clicking or starter turning or anything. I checked all the wires, the fuse and...

John deere l100 won't start but does turn over? [ 1 Answers ]

Cheked power at seat kill switch while cranking had 0 volts. Checked fuel filter its OK. Checked fues its OK. Changed spark plug. Don't know if getting spark.

I have a John Deer L100 with an Intek 17hp OHV that won't start. [ 1 Answers ]

I have power, fuel but no spark won't fire could the spark plug be the problem or is it the silinoid and if it is what is the gap distance between it and the flywheel. Worked on it till 2 AM the other night trying to get it running please help!

View more questions Search