 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Utilitech Pump not priming
Hi, this is the pump I have: https://www.google.com/search?um=1&hl=en&safe=off&biw=1024&bih=653&tbm=is ch&oq=utilitech+utp15p1+&gs_l=img.3... 3046.3046.0.3474.1.1.0.0.0.0.85.85.1.1.0... 0.0... 1c.1.6.img._K_JVExW12c&q=utilitech%20utp15p1#imgrc =WIKZxMc_SwFMeM%3A%3BuWNZdda0-q3NDM%3Bhttp%253A%252F%252Fimages.lowes.com%252Fpr oduct%252Fconverted%252F054757%252F054757083410.jp g%3Bhttp%253A%252F%252Fwww.lowes.com%252Fpd_313833-57366-UTP15P1_4294820778_429493%3B900%3B900 It is actuall 1 1/2 HP not 1. I believe the priming plug is where the pressure gauge is and I've tried to put water into it multiple times but when I put it back on, I can see the water level in the clear filter tube drop then starts "slurping upward" but can't start a flow of water. What should I do?
|
||||
Check out some similar questions!
I think I messed up the standard adjustment of the Utilitech Pump which is set at 20/40 from the factory. Now I can't get the pump to stay on since I adjusted it? Curious if anyone knew any tricks?
How do I prime utilitech pump
Today I tried to have my house power washed and within less than half an hour my water pump was drained with no pressure reading on the gauge. AS I have done before, when pressure goes below about 20 lbs, I shut of pump. After it stands for a few hours it will usually begin to pump and fill my...
My parents are out of town and when I came to check on the house I went to the restroom and flushed, it wouldn't no water was in the tank, I have heard my dad talk about sometimes he has to prime the pump, I'm wondering how I do this?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
