 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman dyt 4000, 18.5 briggs. Has fluctuating rpm until warm
Just bought used, ran fine into I backed off trailer and was leaking bunch of gas from carb area. After wiping down it stopped. Seemed to run OK, and no more gas leak, but now has fluctuating rpm,at idle and full throttle.. seems to smooth out when its warmed up.. thanks.
|
||||
|
||||
|
Hi,
Fluctuations are generally caused by lean running conditions associated with dirt in the low speed circuit of the carb. Without knowing the model number of the machine or the engine, I can say little else. Since it goes away warm, it is not severe and will possibly clear itself up. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, while mowing yesterday engine started running rough and quit.Went out after it cooled and pulled spark plug and lots of gas ran out of engine cylinder.I also pulled off valve cover and it was full of gas.I replaced head gasket last year and it ran good the rest of season.Any ideas why the gas...
Oil spits out of fuel pump screen
My craftsman dyt 4000 with briggs and strattin 18.5 hp engine sputtered and stalled yesterday... I can get it to start but has no power and backfires till it stalls 30 seconds later... any ideas.. carb maybe hopefully... oil has been changed along with spark plug.fuel filter and air filter...
Hello, I am using a Craftsman DYT 4000, I was cutting the lawn and suddenly the blade stopped, so I go to pull the red button up, the button which is on the right side, came off, now is this a emergency trip of some sort or the button is broken off, can I glue it back in or not.. thanks, otherwise...
View more questions Search
|
