| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Can I use two 1 pole GFI breakers as a 2 pole GFI?
 [ 8 Answers ]
 Wiring up a 240v pool pump motor, two hots and a ground connect to it. I've never wired a GFI breaker and I have been given two 1 pole GFI breakers. I knew there was a ground wire on the breakers but did not expect to also see a connector for neutral. I've also got enough 12/3 with ground... 
Can hook up a 110v gfi breaker of one leg ogf a 220v 50 gfi
 [ 3 Answers ]
 I have a 50 amp 220 v gfi hooked up to my hot tub, I ran a 110 v 10 amp gfi off one leg for the underwater light just for extra safety, is this safe to do? I have heard on TV that you can not run 1 gfi off another. Or is this just pertaining ti wall outlets? 
Outlets on my GFI don't work but GFI is working
 [ 7 Answers ]
 I have one plug in the garage and one out door plug that are not working. I have reset my GFI plug and the GFI plug is working however the other two plugs are still not working. Should I replace both plugs or is there something else going on? The GFI outlet itself has power. The test and reset... 
OK to replace a 20A GFI with a 15A GFI?
 [ 1 Answers ]
 I have two GFI outlets in my kitchen. I am replacing them w/another color. The new color are only available in 15A, while the ones I am replacing are 20A. The only thing I plug into them are toasters, coffee pots, and mixers... not sure if the lower amp has anything to do with the ground fault... 
Two Single Pole GFI's = one Double Pole 220v GFI?
 [ 6 Answers ]
 Hello there, Installing a pool motor, 220v hayward northstar two speed. Could not find a double pole 40 amp GFI, electric supply store recommended two single pole 20A GFI's sharing a neutral? Does this make sense. I have a 40amp double pole in the main feeding the sub via the sub panel... View more questions Search 
 |