Ask Experts Questions for FREE Help !
Ask
    bmikulak83's Avatar
    bmikulak83 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 13, 2013, 08:01 AM
    Gas furnace
    Its only blowing out cold air what could be wrong
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Feb 13, 2013, 08:04 AM
    First thing I would recommend is to reset the furnace... by turning the power off to it.. waiting a minute or two then turn it back on.

    Sometimes that will clear a fault. If it doesn't you might need to call a professional tocheck it out.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #3

    Feb 13, 2013, 08:50 PM
    Lots of options here. Is there a diagnostic light blinking on the control board (may be a site window that will allow you to see the led light through the cover of the furnace). We need more info to be of any assistance. Try doing as smoothy suggested, and if that fails let us know exactly what the unit does when power is turned back on.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a goodman GDT090-4A gas furnace. The igniter will ignite the gas and the gas w [ 2 Answers ]

The igniter will ignite the gas, and the gas will run for a second or a few seconds and will then cut off. It will continue to cycle like this until it finally will stay on but at times will take forever.

My carrier gas furnace would not light up the pilot burner although sparks and gas is [ 0 Answers ]

My carrier gas furnace would not light up the pilot burner although sparks and gas is present. I've tried to light up the pilot burner with a gas grill light and it works.

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 1 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it's just the burners that turns off after a few seconds. If I try turning the furnace on and off a few times it sometimes fires up and stays on. I have tried...

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 0 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it just the burners that turns off. If I try turning the furnace on and off a few times it sometimes fires up and stays on.


View more questions Search