Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Track lighting not working when bulb screwed in
[ 1 Answers ]
Hi, Thanks in advance for any help. I've been spending all day installing track lighting and finally think I figured out the issue but can't figure out why it's happening. I have the track installed & confirm that there is power to the unit (I used a test on the wires and then also on one of the...
One light in my track light doesn't work. I have replaced the bulb,still not working
[ 4 Answers ]
I have a track light of three mini-floods. (not sure what brand.) I have replaced bulbs before. Now, one end light (never been replaced) is not working. I put a new bulb in, and it still won't work. I have made sure that the connection is still there, and that the individual on/off switch on...
Upon installation of bulb, base of bulb burns and bulb never lights
[ 1 Answers ]
Installed two new 3 bulb post lights on concrete entry piers, one bulb pops and burns the base immediately upon installation... I have checked the wiring and everything is wired correctly, I assume ths is a bad bulb socket and the fixture is defective, has anyone had this problem before?
Track Lighting: 6 pendant lights/4 sections of track 2 lights not working?
[ 4 Answers ]
Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...
Hampton Track Lighting -- How to change the 50w bulb
[ 0 Answers ]
The small bulb is impossible to remove. Do I remove the bulb only (not sure how since it won't come out) or is there more to changing a burnt out bulb than I realize w/Hampton tracking lights. View more questions Search
|