Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Track Lighting: 6 pendant lights/4 sections of track 2 lights not working?
[ 4 Answers ]
Hi, Here is the situation. Two light bulbs blew. Our handy man told us that when you replace the bulbs 12v that you can not touch them or they will keep blowing. So we used gloves and changed the two blown bulbs. Voilą! Light. About 3 days later the first one blew again and then the...
Hampton Track Lighting -- How to change the 50w bulb
[ 0 Answers ]
The small bulb is impossible to remove. Do I remove the bulb only (not sure how since it won't come out) or is there more to changing a burnt out bulb than I realize w/Hampton tracking lights.
Non-working track lighting
[ 1 Answers ]
One of the lamps was working, one was not on a two lamp track lighting fixture in my kitchen. I purchased 2 new lamps (so they would match). After they were installed, neither one worked. We tested the bulbs, they were fine. What's really strange is that when we tried to install the old lamp...
Track lighting not working
[ 5 Answers ]
I have a Hampton Bay 7 light track light kit. Each of the 7 light fixtures on the track have a halogen 20W bulb in them. Recently, the power in my house went off for about 10 minutes. This happened at night, so all of the lights/ switches were off. After the power came back on, I noticed that...
Track lighting suddenly not working
[ 1 Answers ]
I have a Hampton bay track lighting unit that has been installed and operating properly for 8 years. It gets it's electric freed from a nead-by ceiling fan. Earlier we switched the juice on and all 5 of the bulbs stopped working at once. The odd thing is the ceiling fan, which is in the same... View more questions Search
|