 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman furnace troubleshooting
I occasionally have water back up in the power ventor that gets into my vacuum line to the pressure switch which keeps furnace running. I have checked and cleaned all drain lines and found no reason for power ventor not to be draining. Any suggestions? Furnace Model # GMPN1 00-4 REV B Serial # 0003664455 Thank you, Phinfan1
|
||||
Check out some similar questions!
I have a Goodman furnace that was not coming on, I replaced the pressure switch and the problem is still not fixed however I can get the furnace to ignite if I suck on the pressure switch hose, what could be the problem Thanks Derryn
Inducer motor runs after shut down in heating or cooling. Status light blinks 5 times, signaling, "false flame sense" I'm perplexed.
How can you tell if your heat exchanger is bad? I am getting high Co2 reading. And the flames seems to be blowing to strong, or could that be the gas valve, or dose it need adjustment in the tudes? I don't think the chinney is plugged.
I have a Goodman GDH 80703AXAC furnace it runs for about 30 min then shuts of on high limit then will allow relight? Any ideas what is going on?
I have a goodman furnace model # gmh80703ancb it is only 3 years old. The unit itself works great but the blower isn't working. Is there something I can do to check it before calling to get it serviced? Its getting cold, please help
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
