Ask Experts Questions for FREE Help !
Ask
    spiderweb61's Avatar
    spiderweb61 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 1, 2013, 08:58 AM
    Electronic blower time delay relay,/ goodman manufacturing/troubleshooting
    Goodman ARUD blower unit, 7kw heat kit, fuse on the ele. Blower time relay keeps blowing, do I need a new board? Thanks,, wes
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Feb 1, 2013, 04:49 PM
    Check all of the wiring. Anything burned or discolored near the connection point, needs to be replaced. On Goodman equipment, I always go at least one wire size heavier. If there is enough extra wire, it would probably be a good idea to replace the push on connectors even if they don't show any signs of burning. Loose connections will cause a high amp draw & burn out relays.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman time delay fan relay problems [ 17 Answers ]

Hello, I have a goodman system and it freezes up when blower fan stops working. I have been told told it is the goodman time delay fan switch. Does this sound correct.. How much to fix and is it a diy project.. Thanks in advance.. :)

Goodman blower time delay relay? [ 1 Answers ]

There is a 6 minute delay from when my heat pump compressor comes on until the inside blower comes on. It used to only delay a few seconds. This is a Goodman A60-20 air handler. Do I need to replace the blower time delay relay?

Troubleshooting goodman manufacturing furnace? [ 1 Answers ]

I have a Goodman GMP furnace which now will not come on. When I unplug the unit and plug it back in, it tries to start for a split second and then just quietly hums. Any thoughts?

Goodman Air Handler Sequencer Time Delay? [ 11 Answers ]

I cannot find the part # for the time delay relay for the blower of my air handler (MOD #aepf3036163). Can anyone point me in the right direction? Thanks :) Courtney

Goodman PHK060-1 Indoor Blower Delay Problem [ 0 Answers ]

I have a Goodman PHK060-1 heat pump. Just recently I have been having a delay after the unit fires up. The outdoor blower starts, and the indoor blower starts anywhere from virtually instantly to five minutes later. Generally speaking, it *seems* like the longer since it has run (and possibly...


View more questions Search