Ask Experts Questions for FREE Help !
Ask
    HVAC help's Avatar
    HVAC help Posts: 3, Reputation: 1
    New Member
     
    #1

    Jan 30, 2013, 03:18 PM
    Inducer motor assembly replacement
    How much does it usually cost to have an inducer motor assembly replaced? I was quoted a flat fee of $525. Is that reasonable?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Jan 30, 2013, 04:23 PM
    Depends on what system you have. Lots of different induced draft blowers out there, and the cost of them definitely varies greatly.
    HVAC help's Avatar
    HVAC help Posts: 3, Reputation: 1
    New Member
     
    #3

    Jan 30, 2013, 08:34 PM
    It's a Goodman inducer motor assembly for a natural gas furnace. I don't have any additional details. I would like to know is $525 sounds reasonable before I ask for this repair. Thanks much for your help!
    HVAC help's Avatar
    HVAC help Posts: 3, Reputation: 1
    New Member
     
    #4

    Jan 30, 2013, 08:36 PM
    Quote Originally Posted by mygirlsdad77 View Post
    Depends on what system you have. Lots of different induced draft blowers out there, and the cost of them definately varies greatly.
    It's for the following natural gas furnace:

    Model No: U-47 Rev B
    Serial No: 0305775771
    Goodman Manufacturing
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #5

    Jan 30, 2013, 08:37 PM
    Agreed but $525 sounds awfully high. Sounds like you are dealing with a "flat rate" company. Their prices tend to be on the high side but you are guaranteed a price versus a company which charges for time & materials. I'd get at least one other estimate.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Inducer motor? [ 1 Answers ]

When I turn my thermostat on at first I hear a humming then it blows hot air then cold air. I was told I need an Inducer motor? Does that sound correct?

What is the assembly dirctions for seat and spring assembly replacement [ 0 Answers ]

I have a single handle shower. The spout is leaking. I bought all new parts but I don't know how to insert the seat and springs. What goes in first and which way do they go

How do I find a replacement tube that runs from inducer motor to pressure sensor [ 5 Answers ]

The tube has dry rotted I was able to shorten it to make the system work but I can't find a part # for a replacement.

Replacement Inducer [ 10 Answers ]

What is the replacement inducer for a horizontal Carrier 349MAV036075 furnace? Currently, the inducer blower is a Fasco 7162-3136. The Fasco website suggests the A142 but with the inducer mounted blower upward on the furnace the condensation drain nipple on the inducer is at the 9 o'clock...


View more questions Search