Ask Experts Questions for FREE Help !
Ask
    pamelaerb's Avatar
    pamelaerb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 28, 2013, 09:21 AM
    How do I tighten a loose shower handle back plate
    There is a chrome back plate behind my single handle shower knob that is loose. There is one screw that seems to be the thing to tighten it but I can't seem to make a connection anywhere to make it tighter. What am I doing wrong? Do I have to take the know apart to tighten it?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jan 28, 2013, 10:15 AM
    Post a picture.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hot water handle on double handle disc faucet from Ikea get loose after use, help? [ 2 Answers ]

I have a small drip from the hot water side of my ikea faucet. Replaced disc which helped a bit but still small drip (like once every 4 minutes). The hot water handle loosens quickly after just a little use, and this seems like part of the probem. Any ideas for keeping tightened?

How to tighten loose chair legs [ 5 Answers ]

I have a vintage (not sure if it qualifies as antique yet) Duncan Phyfe diningroom set I inherited from my mom. It was in pretty bad shape when I got it. I found an older gentleman who knew how to restore it. It looked beautiful when it was finished but now after a few years, all the chair legs are...

Replace shower diverter and back plate [ 1 Answers ]

Tom, The diverter in the shower and head need to be changed- they are about 15 years old- Moen or American standard- when my husband try to pull off the knob which control temperature and flow he must have distrub settings -now we only have very hot water- how do we remove the knob and back...

One handle faucet is loose, how do I tighten it? [ 1 Answers ]

I have a one handle Moen faucet and the handle slowly falls down when you turn it on. How do I tighten this?

2" shower trap: won't tighten anymore, no leak, but still a tad loose. [ 5 Answers ]

Hi there. I am currently installing a 2nd bathroom in our house. The shower trap moves a little, but I can't tighten it anymore, and water does not leak when I stick a hose down the drain. Can I cover this up even though it moves it a bit? Is it supposed to move at the swivel point even when...

View more questions Search