 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York furnace
I have a York furnace with 50a50-241 control card have 4 blinking lights I jumped safety ls switches cleared 4 blink fault burner ignite for 2 minutes and go out rests relights and goes out blower fan never comes on and notice light smoke coming from unit any ideas of problem causing this believe 7 or 8 blinks come on after burner recycle
|
||||
Check out some similar questions!
Furnace comes on for a couple seconds. Then shuts off. But if power is reset it comes back on for a couple seconds again. Flame sensor? Gas valve?
I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...
How do you hook up a thermostat for a York furnace to the furnace?
I have a York furnace model # p2udd12p07601c. The problem I am having is when the funace starts up, occasionaly I can see the coil igniter light up and 30 seconds later or so the flame ignites by the igniter coil but only for a second and then it goes out without igniting across to the flame...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
