Ask Experts Questions for FREE Help !
Ask
    allhuggins's Avatar
    allhuggins Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 25, 2013, 10:13 AM
    Maple chase thermostat 9620
    My thermostat used to read with Fahrenheit now its changed to celsius, I need to know how to change it back to Fahrenheit!
    endent's Avatar
    endent Posts: 13, Reputation: 2
    New Member
    		  
    #2

    Jan 28, 2013, 01:54 PM
    Try this: Press and hold SET, press DOWN ARROW, then release both at the same time.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maple Chase Thermostat Manual 9620 [ 1 Answers ]

I noticed that it felt hot downstairs so I went to check the thermostat. There was no reading on the display so we replaced the batteries. Now it just says "low batt". Doe the thermstate need to be reset somehow or what?

Replacing maple chase thermostat with ritetemp thermostat model # 6030 [ 0 Answers ]

Replacing maple chase thermostat with ritetemp thermostat model # 6030

Maple Chase / Robert Shaw 9620 [ 3 Answers ]

Let me start by saying this could either be a thermostat or a heater problem. We have a Maple Chase that's the equivalent of a Robert Shaw 9620. After reading different posts here, I found the correct owners manual online. Our problem is that the heater runs and runs but it's blowing very cold...

Maple chase 9620 emergency light on [ 1 Answers ]

Hello, We have a maple chase thermostat and the emergency light is red. It states on the manual that the "The EMER indicator is illuminated only when the system switch is moved to the EM (emergency heat) position. The EM position is used only when the primary stage of heat is not functioning or...

View more questions Search