Ask Experts Questions for FREE Help !
Ask
    djs3314's Avatar
    djs3314 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 28, 2012, 07:00 PM
    Maple Chase Thermostat Manual 9620
    I noticed that it felt hot downstairs so I went to check the thermostat. There was no reading on the display so we replaced the batteries. Now it just says "low batt". Doe the thermstate need to be reset somehow or what?
    tbbulls's Avatar
    tbbulls Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 29, 2013, 07:46 PM
    My display where the time usually show is showing -AC anyone know what this means didn't see anything about it in the manual.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Calipration maple chase thermostat manual 9600? [ 0 Answers ]

Where do I find instructions to caliprate the maple chase thermostate 9600 series. The manual does not instruct. Thanks!

Replacing maple chase thermostat with ritetemp thermostat model # 6030 [ 0 Answers ]

Replacing maple chase thermostat with ritetemp thermostat model # 6030

Maple Chase / Robert Shaw 9620 [ 3 Answers ]

Let me start by saying this could either be a thermostat or a heater problem. We have a Maple Chase that's the equivalent of a Robert Shaw 9620. After reading different posts here, I found the correct owners manual online. Our problem is that the heater runs and runs but it's blowing very cold...

Maple chase 9620 emergency light on [ 1 Answers ]

Hello, We have a maple chase thermostat and the emergency light is red. It states on the manual that the "The EMER indicator is illuminated only when the system switch is moved to the EM (emergency heat) position. The EM position is used only when the primary stage of heat is not functioning or...

Maple Chase thermostat [ 1 Answers ]

I have a Maple Chase Item # 09620 thermostat. Last night, I replaced the batteries because the panel was displaying the 'lo bat' display. After replacing the batteries, the display still read 'lo bat' and the heat would not come on. I checked the cover to find out what further steps to take...

View more questions Search