 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman furnace problems
Model 7656-856 furnace is not able to turn the blower fan on. It will come on only if the entire furnace is cool to the touch, or when it is not, if you use something to manually rotate the fan or if you hit the side of the casing around the fan. Would this be caused by the fan itself or something in the wiring?
|
||||
Check out some similar questions!
I have a Coleman Presidential II 2702B Ida 7441-BM Electric Furnace. I have two problems. It started with the heater coming on and at times staying on even after I turned the thermostat completely down which results in killing the power. Now I have a newer problem where a heating element...
When switch comes out of set position, the pilot light goes out.
Where is the heat anticipator setting for a coleman evcon furnace model dga2075800
Coleman Evcon Furnace DGAT090BDD Furnace kicks on blower stays on when you check there is no heat coming through the vents. Look at the furnace and the green indicator light is blinking 4 times. Have woke up every day this week with the tempature in my house 58 degrees. What is wrong??
The diagnostic light blinks twice on Coleman Evcon #DGAHO56BBSA 5600BTU natural gas forced air out bottom Mobile home heater. 2 blinks is supposed to be "combustion air switch stuck closed" which is called a pressure switch in the part manual. When I restart the furnace cylce and place suction on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
