Ask Experts Questions for FREE Help !
Ask
    Dries's Avatar
    Dries Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2013, 05:50 PM
    Whisper power unit for hot tub
    How do you change the heater timer from 2hrs-6hrs

Check out some similar questions!

Just hooked up hot tub don't seem to have any power [ 2 Answers ]

Hot tub don't seem to have any power shouldn't something come on

Hot tub won't power up [ 1 Answers ]

Used tub that I got from my parents. Electrician wired it using existing 30A GFCI breker in main panel (parents ran tub with 30A GFCI as well) Breaker trips once tub at temp and jets on for 30 secs or so. Trips breaker only, not GFCI. Spoke to hot tub stores and electrical supply house....

Cal spa heater whisper power unit [ 3 Answers ]

I have a cal spa the heater light is on but not heating up just staying at 78 degrees I have a meter but not sure which wires to check on my whisper power unit. There is also a long round fuse that is a bg3031 could that be the problem?

Power for my hot tub [ 2 Answers ]

I am installing hot tub that requires 240 volts I know pump and heater works as I just had it serviced I have 240 running from my panel box using 8/3 wire with 40 amp breaker but my pump or nothing works would it be possible my breaker is no good and how would I test it

Purex Triton Whisper Flo failure, cuts out power fuse [ 1 Answers ]

The 9year old Purex whisper flo seem to have sufficient power, but after 5-10 minutes ( I think) is the source of power surge so the fuse box fuse goes out. Any one else experienced the similar problem? Just want to make sure before I purchase the motor. Thanks

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.