 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier weathermaster 8000 won't start in automatic
I have to turn power switch off/on to get the furnace to come up to heat. Fan does not run until I perform this task. Furnace will then run and stay on until desired temperature is reached. However, it will not re-start on its own. Filter is clean and all cold air returns are free and clear.
What's next? |
||||
Check out some similar questions!
My 74 chevy pickup sat over the winter and now it won't start. I was running just fine before I let it sit. It turns over but won't start. If I use starter fluid, it will start but won't stay running. I don't smell gas in the carb either. I'm thinking it's the fuel pump or the filter. Problem...
My furnace will start and works tntil the blower motor should start. Then it goes and shuts off and flashes a code 33. I have replaced the motor capacitor. The motor is fine. I do a 3hr resety and it does the same thing. The blower comes on, the gas comnes on for 90 seconds and then it shuts down.
my john deere z 425 won't start, it turns over but won't start. I keep turning it over but it never cranks. It only has 150 hours on it
Would you please tell me where (or if there is one) the reset button on a Carrier Weathermaster 9200 would be located? My gas furnace has gone out again and I would like to do anything possible to fix it before calling in a furnace repair man. It is about 12 years old.
I have a carrier weathermaker 8000 that won't light flashing error code 43 how do I fix it
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
