Ask Experts Questions for FREE Help !
Ask
    rmoon's Avatar
    rmoon Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 16, 2011, 01:17 PM
    Carrier weathermaster 8000 code 33
    My furnace will start and works tntil the blower motor should start. Then it goes and shuts off and flashes a code 33. I have replaced the motor capacitor. The motor is fine. I do a 3hr resety and it does the same thing. The blower comes on, the gas comnes on for 90 seconds and then it shuts down.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Dec 16, 2011, 08:27 PM
    Will the blower run after the burners start up? If not you may have a bad control board. If the blower runs after the burners start then locks out on high limit check for air flow restriction. Turn your thermostat fan switch to on with the blower running all the time turn your heat on. If it keeps heating you got a bad board.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier weathermaker 8000 code 33 [ 4 Answers ]

My Carrier Weathermaker 8000 a few days ago the air began to blow non stop and the burners are not igniting. I am getting Code 33. I did all the resets, unplug control board, switch to air condition nothing. The air is still blowing non stop. To stop it I need to shut it off by main switch on...

Code 32 on carrier 8000 furnace [ 1 Answers ]

I get a code 32 after the fan runs for 90 seconds and then the inducer motor runs... no ignitor, no gas flow. The inducer motor continues to run until I cut the power. Both pressure switches are closed when the inducer motor starts. I checked for flue obstructions (none)

Carrier Weathermaker 8000 Error Code 24 [ 1 Answers ]

I have a Carrier 8000 Weathermaker (model # 58WAV091-16) that is displying error code 24. Any idea what this is (24 SECONDARY VOLTAGE FUSE IS OPEN Check for: - Short circuit in secondary voltage (24V) wiring and how I can fix it?

Carrier 8000 Error Code 21 [ 9 Answers ]

Hello all, I have read through many post but can not find info on an error code 21. Any idea which direction I need to go with fixing this unit? Unit says 21 is a Gas Heating Lockout or Stuck gas valve relay. Does this mean I need to get a hammer and tap on that thing to unstick it? :D Any Help...

Carrier Weathermaker 8000 Trouble Code [ 2 Answers ]

I have a carrier Weathermaker 8000. Started up furnace and forgot to remove baffle. Now have trouble code 33 and have to manually reset. How do I accomplish this?

View more questions Search