 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman presidential 2 electric furnace
I have 2 coleman presidential 2 heaters, I would like to swap them ouot, the one which does not work has 4 wires, the one I wish to replace it with has 2 supply wires. 2 large and 2 small fuses as opposed to 4 large fuses... is this a big deal to iinterchange??
"'' |
||||
Check out some similar questions!
I have a Coleman Presidential II 2702B Ida 7441-BM Electric Furnace. I have two problems. It started with the heater coming on and at times staying on even after I turned the thermostat completely down which results in killing the power. Now I have a newer problem where a heating element...
Hello all, I just moved into a mobile home with a Coleman Presidential 2 electric furnace. The elements are getting red hot and the fan isn't coming on. What I noticed is the elements reach a brightness of red becoming very hot and then cool down. After a few seconds they get hot again without...
The blower fan on my electric furnace will not shut off without tripping the main breaker switch. It is an older furnace that had not been used all too often as I generally use a wood/coal stove for heating, but had been operating properly when I have used it. The last time it was used , the...
Our Coleman Presidential 2 electric furnace's fan will not come on when the thermostat is clicked. I know the coils are working 'cause the furnace box get heated up. I've already tried flipping the breakers as well as letting the furnace cool off all the way before activating the thermostat and...
Hi I have a coleman electric presidential II furnace serial #117960300 model# 3123B750blower #3123A590 when I turn the heat on it will heat and work fine but then the blower stops and the heat keeps heating it gets very hot and I have to trip the breaker to turn it off can any one help me thank you...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
