Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Noma 5+1+1 thermostat - jumper?
[ 1 Answers ]
I just purchased a Noma 5+1+1 heating/cooling programmable thermostat to replace the one that came with my new home. I have a furnace and an A/C unit. The wiring on the old one is as follows: Green wire > G Orange wire > Y White wire > W Red wire > RC jumped to RH The new thermostat has...
Ceiling fan w/ remote issue...
[ 4 Answers ]
I bought some long life fluorescent lights for my fan with remote. After I tried to power the lights on it flashed on, then off. Now, neither the fan nor the lights will power on with the remote or the pull strings. It only occurred after this happened that the lights won't work with dimmers. ...
Wiring issue with a Hunter Ceiling fan
[ 2 Answers ]
Thanks in advance for anyone who can help me. I just moved into a brand new home and the Master Bedroom is pre-wired for a ceiling fan. It has two wall switches, one to control the light and one for the fan. The Hunter fan has a black, a white, a black/white and two green wires. The prewire...
Identifying jumper pin
[ 3 Answers ]
Someone posted that their floppy drive was recognized but when trying to use, it says to insert floppy. I have the same problem and it was suggested to "remove CMOS jumper pin from Motherboard. I've never done this. Can someone please tell me where this is located or where an image might be... View more questions Search
|