Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    tableclocks's Avatar
    tableclocks Posts: 432, Reputation: 2
    Full Member
    		  
    #21

    Jan 8, 2013, 09:29 PM
    Yes.. gaps at the curved radiator.. where it comes up the back.. and.back front between the rad and fan and corners... nooooo.. I did not fill in any gaps.. holes etc in the heat exchanger... thank you for your concern... I don't know how to get a link for a photo.. I could e mail you some if you like... wonder why we can't do pictures on here ?
    My e mail is... [email protected].. there I can do some picks...
    Thank you my friend... richard
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #22

    Jan 9, 2013, 03:24 PM
    Richard,
    I think you can attach pictures by clicking on the square icon with mountains on it. Said icon is in the header of the quick answer box. If that doesn't work, you can open an account (free) with photobucket.com or similar photo sharing site, post your pictures on there, & provide a link to the photo album here. If that doesn't work, send me a private message & I'll reply with my e-mail.
    tableclocks's Avatar
    tableclocks Posts: 432, Reputation: 2
    Full Member
    		  
    #23

    Jan 9, 2013, 06:44 PM
    Picks
    Name: 007.jpg Views: 190 Size: 56.9 KB

    Name: 008.jpg Views: 188 Size: 54.3 KB

    Name: 009.jpg Views: 622 Size: 89.3 KB
    tableclocks's Avatar
    tableclocks Posts: 432, Reputation: 2
    Full Member
    		  
    #24

    Jan 9, 2013, 06:48 PM
    Kaowool also behind the exhaust tube and between the fan and exhaust
    There is a lose of hot comeing through the squarle cage fan... from the heat exchanger... guess thts normal.. picks come from... go advanced then click on the paper clip.. etc... tks my friend
    tableclocks's Avatar
    tableclocks Posts: 432, Reputation: 2
    Full Member
    		  
    #25

    Jan 9, 2013, 06:50 PM
    Name: 011.jpg Views: 440 Size: 55.5 KB
    Last oneName: 011.jpg Views: 440 Size: 55.5 KB
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #26

    Jan 9, 2013, 08:35 PM
    Great pictures, thanks. Pictures are nearly always a help.

    That is an old CMF. Beckett hasn't used Wayne burners in years, thankfully. I think that burner is an MS series. I understand your concern about the heat but I'm reluctant to stuff the kaowool in there for fear it might get sucked into the blower.
    tableclocks's Avatar
    tableclocks Posts: 432, Reputation: 2
    Full Member
    		  
    #27

    Jan 10, 2013, 06:03 AM
    Thanks.. I keep a good eye on it.. I am right nx to it when I an in the garage
    Yes very old but very simple to work on... some older things with less safety stuff is eaiser to work on... just like today's cars... can't do much to them.. older cars.. points n plugs and clean oil... your good to go...
    On the furnace... few yrs ago the drive shaft.. whatever... from the motor to the pump broke
    Like a tube... I replaced that... I also use a 55 gal barrow for a little heat n to burn some mail... pick latter... tks my friend... richard
    tableclocks's Avatar
    tableclocks Posts: 432, Reputation: 2
    Full Member
    		  
    #28

    Jan 11, 2013, 03:45 PM
    Name: 004.jpg Views: 245 Size: 77.4 KB

    Name: 006.jpg Views: 349 Size: 78.8 KB
    tableclocks's Avatar
    tableclocks Posts: 432, Reputation: 2
    Full Member
    		  
    #29

    Jan 11, 2013, 03:45 PM
    Heat exchanger I make from old exhaust pipe
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #30

    Jan 11, 2013, 05:42 PM
    Quote Originally Posted by tableclocks View Post
    heat exchanger i make from old exhaust pipe
    American ingenuity. ;)
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Oil around my spark plug! [ 3 Answers ]

I have a 1997 Honda Civic EX, after from going home from out of town. My check engine light was flicking on and off. The car all suddenly started shaking. When I got home, I replaced new park plugs and took it for a test drive and ran well. After for a couple minutes same thing happened again but...

Intermittent spark ignition spark but will not light pilot on natural gas furnace [ 1 Answers ]

Johnson ultra air 97 natural gas furnace , 18 years old Starting sequence 1) exhaust blower and main blower come on 2) 2 seconds later intermittent spark igniter starts sparking , but will not ignite pilot Will shut down after maybe 20 seconds , do not smell any gas Things I've tried......

Furnace, model no. Gdpi075-3, I am getting spark to pilot and pilot lights ,spark con [ 2 Answers ]

Furnace, model no. gdpi075-3, I am getting spark to the pilot, pilot lights, spark continues, but valve does not open for main burner. This is a dual stage gas valve. There is 24 volts at pin 4 on the gas valve, I also measure 0.76 volts at spark control, this wire comes from flame sensor. With all...

The oil is come on the spark at my car [ 1 Answers ]

As I open the spark there is an oil at the spark head.. and the car won't start on.

Oil in spark plugs [ 4 Answers ]

Hello, I have a riding mower that, when started would run a few minutes and shut down. I read the manual and it said possibly stale fuel and tune up. I changed the gas, tuned it up, cleaned the carb. When I started it same thing happened,but a big cloud of white smoke came out of the muffler. I...

View more questions Search