Ask Experts Questions for FREE Help !
Ask
    ruddfan's Avatar
    ruddfan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2013, 01:09 PM
    Plumbing questions answered
    Can you replace a cut off valve that has a splitter to the dishwasher with one without a splitter and can they just screw on like a facet outside when you replace it?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 10, 2013, 02:30 PM
    If the valve is functioning properly, you don't have to replace the valve, just get a compression cap and put it on the side you don't need.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Plumbing questions answered [ 2 Answers ]

How can I turn off water flow to toilet when the water supply valve is already turned to the off position but its not shutting off the flow?

Plumbing questions answered? [ 1 Answers ]

I have a solid fuel stove which heats the rads. When we put on the fire water comes out of the overflow pipe from the attic. There is also a lot of steam coming from the tank in attic and the pipes shake. Any suggestions to what the problem might be? The rads do not heat properly either

Plumbing questions answered [ 5 Answers ]

Under my kitchen sink there are two PVC pipes coming out of the wall. They are 8 1/2" apart and appear to be similar, except one is capped. One is in use for the sink drain, and I'm hoping the other is a drain, too. The house is 22 years old; Seattle area. What are my chances that the second is...

Plumbing questions answered [ 1 Answers ]

We removed the toilet in our master bathroom to do some tiling. Once done, we were not able to install the toilet back because a piece of the flange had broken off. We decided to buy a new toilet (that uses less water) and called a plumber to put a new flange down and install the new toilet. It...

Plumbing questions answered [ 1 Answers ]

My hot water is far to powerful in the shower can I put a valve in the line between mains pressure cylnder and the shower?

View more questions Search