Ask Experts Questions for FREE Help !
Ask
    Airmo88's Avatar
    Airmo88 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 7, 2013, 01:50 PM
    Kenmore Elite dryer not coming off delicates cycle at 36 minutes
    The dryer won't come off the delicates setting and only dries for 39 minutes. Please help
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Jan 22, 2013, 04:59 PM
    Clean the dryer, first, and pay attention to the sensors. The sensors get coated with dirt and will not sense the heat and moisture.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite dryer stops mid cycle? [ 1 Answers ]

Kenmore elite electric dryer stops mid cicle after running for approximately 6 to 9 minutes,press start button starts quickly again the stops again?

Why does Kenmore Elite Gas dryer only give heat for first 5 minutes? [ 1 Answers ]

I have a eight year old Kenmore elite gas dryer model 110-75962401 never had any problem until recently. It seems the dryer will give heat for the first 5 minutes then it just blows cold air? The lint vent is spotless and well as the inside lint trap and housing I know this because I cleaned it!...

Kenmore elite dryer kicks breaker out after 3 minutes [ 0 Answers ]

If I run my dryer with no heat on a timed cycle it runs great but if I use any heat cycle it heats up but throws the breaker after apx 3 minutes. Ant ideas?

Kenmore elite HE4 dryer is sqeaking for first few minutes of cycle [ 0 Answers ]

My Kenmore Elite HE4 gas dryer has never had a problem until now. It is approx. 5 years old. It is making a sqeaking sound as it spins in the first few minutes of the cycle. The sounds stops. I am careful not to overload it. It also seems to be drying less adequately i.e. I often have to run a...

Kenmore elite dishwasher cycle lasts 3 hours when is should be 88 minutes [ 0 Answers ]

I have turned up the hot water heater to 150 degrees. I have run warm water before starting dishwasher. Dishes are clean. Another expert said it was a control panel but the cycles work, it just takes a long time.


View more questions Search