 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Extension cord
My power source is 125/230 14-50 plug from a generator that will feed a mig welder with 20a 250v plug. The power source plug is a four wire with four prongs and the feed plug is only a three wire with three prongs. Do I eliminate the ground or neutral on the three wire plug?
|
||||
Check out some similar questions!
I am currently setting up my breaker box to be powered up in the event of a power loss to my home. I live "out in the sticks" and have been caught once with no power and watched as my basement was beginning to fill with water due to a intense rain storm that passed through the area. I found...
What is a conductor extension cord?
I am wondering if a person can cut the ends off an extension and use it to run power from your house to a shed. The extgension cord is a heavy duty 10 gauge cord. And can you run it through conduit? There would be 20-25ft of this cord in conduit and 25ft ran in the house. I'm just looking to save...
We had our TV mounted and installed a month ago and the installer said I should get an in wall extension cord because I couldn't run the tv's power cord through the wall. But when I googled the in wall extension cords it said that they weren't permanent fixes. What do I do to conceal the TV power...
Since outdoor extension cords should not be buried, can you make a uf cable "extension" cord to plug into a ground fault outdoor outlet and then bury it?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
