Ask Experts Questions for FREE Help !
Ask
    weatherman11's Avatar
    weatherman11 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 5, 2013, 05:10 PM
    Oil burner circulator
    The main house circulator works only when connected from another thermostat. The main thermostat was changed. But the circulator still does not work . Does this mean the primary control needs to be replaced?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Jan 5, 2013, 05:31 PM
    Do you have zone valves? If so, what make?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Oil Burner still dripping.Oil Co. Tricks.fear for 3 dogs lives [ 8 Answers ]

That 1 you see as a response to my boiler question was to redirect my boiler question to heating and cooling. Please refer to boiler burner dripping below. Still need an answer as am not willing to have the tricky oil companies service my problem after causing it. They want to see more dollars...

Oil burning circulator runs furnace fails to fire? [ 3 Answers ]

I woke this morning the circulator on oil furnace was running but was not igniting. Shut switch off then back on same scenario. I then checked the coupling on oil pump to make sure was not broken, last furnace had that problem, checked nozzle was clean, put everything back together turn switch and...

How do you turn on the circulator pump without turning on the burner? [ 0 Answers ]

I just want to be able to turn on the circulator pump without the burning turning on. Is there an easy way? Are the circulator pumps DC or AC? How many volts if DC?

Circulator pump works but oil burner does not fire [ 6 Answers ]

Hello, I have a 2 zone heating system, forced hot water with oil burner/boiler. Also heats domestic hot water tank/coil. Everything works fine EXCEPT zone 2, which is only the living room. When the thermostat is turned up, the circulator pump goes on but the oil burner will not. The...

Bryant oil furnace (#369AAN) with Beckett AFG oil burner [ 1 Answers ]

I was curious as to if anyone can tell me anything about the above product(s). Reason being is because I had no choice in which new high-efficiency furnace would be installed. I have a home warranty through AHS (which is horrible) and this is the product that was installed. Is Bryant as good as...

View more questions Search