Ask Experts Questions for FREE Help !
Ask
    Appie's Avatar
    Appie Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 5, 2013, 12:06 PM
    Furnaceman Model IG-125-3
    I have an original furnace in my house (probably 1963ish). It's a Furnaceman Model IG-125-3. It has worked fine until today. The fan won't turn off and is running continually. Is there a switch I can turn to make it stop?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 5, 2013, 01:15 PM
    I have an original furnace in my house (probably 1963ish). It's a Furnaceman Model IG-125-3. It has worked fine until today. The fan won't turn off and is running continually. Is there a switch I can turn to make it stop?

    If you turn off the main switch you will not have any heat so I would not do that. Being the unit is pretty old I would think the fan and limit switch if so equipped needs to be replaced.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace model GMP 125-4 WILL NOT TURN ON THIS MORNING. [ 1 Answers ]

Checked all electrical parts, has electricity but furnace is dead!

My 125 honda 2008 model giving a troubleshooting eletrical syatem no current at plug [ 3 Answers ]

My 125 honda 2008 model giving a troubleshooting eletrical system no current at plug

Goodman model gmp 125-4 Rev B [ 1 Answers ]

I have a goodman 125-4 rev b furnace and the gas valve will not open. I wiggled the wire to what appears to be a fuse in the red line coming into the gas valve and it got gas for about a half second. What is the component in the gas valve wire?

N=3.125 what is the value of n? [ 4 Answers ]

n=3.125 what is the value of n?

Yamaha yz 125 [ 2 Answers ]

I have a yamaha yz 125 and I was driving down the road and all of a sudden my back tire locked up. I think something is wrong with my gears because I can't shift or anything, the engine runs fine like I can pull the clutch in and start it up but it just won't shift or move. What do you think the...


View more questions Search