Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Location of the OBD-II Plug in a 1995 Honda EX model.
[ 3 Answers ]
OBD-II Plug on the 1995 Honda EX model.
Where is the CVT drive pulley speed sensor located in a honda fit 2008 model
[ 1 Answers ]
From my OBD2 tool , I diagnosed the Honda Fit and I got the DTC P1885 CVT drive pulley speed sensor malfunction. I need to locate where in the engine is this speed sensor circuit? I cannot locate it Thanks
I have a honda trx 125 it sparks but very weak how can I fix I used a new plug
[ 2 Answers ]
My honda trx 125 have weak spark I got a new plug but spark is still weak where should I go from here
I'm tapping into an existing eletrical line and adding a 4 receptacle plug outlet I n
[ 1 Answers ]
So I have an existing wire(ground,black&white wire) hanging along the dryway in my garage and I am trying to install a new 4 plug outlet on an adjacent wall. I have shut off the breaker, spliced into the wires, added an external box(mounted on the outside of the drywall) and then ran wires...
93 honda eletrical problems
[ 4 Answers ]
I bought a car from a neighbor, a 93 honda civic. He said that his son needed to charge the battery, and connected the charger to the battery - without disconnecting the battery. So the voltage went throughout the whole car. He said that since then the car will not start. It is a really nice... View more questions Search
|