Not your question?
Ask your question
View similar questions
Check out some similar questions!
Dbl switch single gang box to a two gang box.. surprise!
[ 1 Answers ]
In my kitchen I installed track lights from the org. fixture. Well the switch was a dbl over& under. The lower switch for the garbage disposer. Simple replace single gang box with dbl and hook lights up to a dimmer switch, the disposer to single switch. Well my gas stove also runs off this. I can...
4 gang box?
[ 2 Answers ]
Installing 4 switch box using old wiring as a power source 1 black 1red and 1 white wire with no ground. I know I need to pigtail off hot to each switch. Which is hot red or black and what do I do with the one I'm not pigtailing from?
Wiring a four gang box
[ 6 Answers ]
Bathroom fan/light replace & wall removed in bathroom remodeling project. Using 12/3 for bathroom fan / light, 12/2 for shower light, 12/2 for outlet. All wires feed to four gang box being feed by 12/2 wire on 20 amp service lead. Question is connecting black to switches. My understanding is to...
3 Gang Box.not a clue
[ 3 Answers ]
Hello all... New York City here. I have to use BX... code. I have 2-wire( there is no ground in BX by the way in 2-wire) ran from the breaker. It is for my bathroom. The house was built in 1938 or 1939. The entire top floor (2 bedrooms and 1 bath) is all run on ONE breaker!! That is how...
5 gang switch box
[ 7 Answers ]
I have a 5 gang metal switch box with 5 switches. I want to eliminate one of the switches so I have only 4 switches. I don't want to use a blank to fill the hole with no switch. I want to use a switch plate for 4 switches. Can I cover the hole with a metal plate and mud over it so it looks like a 4... View more questions Search
|