Amana 90 model #GUCA070AX30 Won't IGNITE

larosebeck Posts: 1, Reputation: 1

New Member

Jan 2, 2013, 06:18 AM

Amana 90 model #GUCA070AX30 Won't IGNITE

My amana 90 is not pushing out effective heat to keep house warm, temperature is @ 60, freezing, please help. Furnace turns on but goes off, possibly won't ignite??

Check out some similar questions!

Gas burner won't ignite [ 0 Answers ]

System is calling for heat. The draft inducer comes on, the hot surface ignitor gets red but burner won't light. I ohmed out the gas valve and it is good. I cleaned the flame sensor with soft sand paper.the IFC has a constant light on the board. What could b the problem?

I have a Amana won't ignite. What can I do? [ 1 Answers ]

I have a have a Amana furnace won't ignite. What can I do?

Amana model #GUCA070AX30 ac wiring diagram [ 1 Answers ]

My son has a amana model# GUCA070AX30 the service person left it laying on the floor with wiring disconnected since they couldn't afford it at the time. He finally bought a motor now the problem is the wiring. I need to know where the white wire goes and also the hi low wires I believe to be hooked...

Amana gas dryer PLG8409W2 won't ignite [ 0 Answers ]

I have an Amana gas dryer model #PLG8409W2 that won't dry. When I opened the front to look at the heating mechanism, I noted that the igniter will turn on and produce a nice red-orange glow, but it never ignites. It would appear that the gas flow doesn't turn on. Everything else on the dryer...

Amana 80 sse will not ignite [ 1 Answers ]

I have an amana 80 sse and it does not ignite the gas after the click for starting the gas. There is a second click later and I assume that is the gas being turned off since it didn't ignite. Is there anything that I can check before calling the heating guy?

View more questions Search

Check out some similar questions!

Add your answer here.