 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat and furnace
Ok since I had this house which is 7 years. Brand new when I purchased. When I set my ritetemp thermostat at say 75 degrees it won't turn the heat on. When I put it on 78 degrees I can hear the click and then the furnace will come on. This used to happen before I changed the thermostat. The original one was the mercury kind and it did the same thing.
|
||||
Check out some similar questions!
I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?
Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?
How do you hook up a thermostat for a York furnace to the furnace?
I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...
I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
