Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Foot Valve Issues? Plase Help!
[ 4 Answers ]
I think I have a foot valve problem but I am not for sure. My problem started like this: First my pump would run till it reached the desired pressure (50 psi). Then it would slowly lose pressure and kick back on. This would happen only occasionally, half of the time I had no issues. Then after a...
Shallow well - Do I need a foot valve
[ 0 Answers ]
I have a shallow well pump that recently lost its prime, ran dry, and burned out its pressure switch. I replaced the switch with a better one (one that cuts out on low pressure), but it turned out one of my wells had lowered enough that it was allowing the pump to suck air. I don't know why but my...
Hot water problem - faulty check valve or mixing valve?
[ 8 Answers ]
Hi, We have a weird problem with hot water running cold in our apartment. At all of the faucets and taps we only get hot water for a minute or two and have to turn off the faucet/tap for 30 seconds and back on again to get hot water. Then the same thing happens again. To get continuous hot...
If I have a check valve, is a foot valve necessary?
[ 8 Answers ]
I have a shallow well , I have a check valve ( brand new) , b ut I don't know if I have a foot valve. My pump will hold pressure , for an hour but after that she unprimes , I've changed the pump and all the piping in the house , I don't know what to do net ? Can you help me ?
Priming without a foot valve
[ 7 Answers ]
I have just bought a pump. When I took it to the mine, my team said it needs a foot valve. The cperson that sold me the pump insist its not necessary. Now I am confused. The Person who sold me the pump can only be available next week and I can't wait as it is affecting production. So which is which... View more questions Search
|