Ask Experts Questions for FREE Help !
Ask
    gusholdem's Avatar
    gusholdem Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2012, 04:25 PM
    Duracraft thermostat not starting my furnace but it comes on when I hit reset button
    My duracraft thermostat won't start my furnace but when I press the reset button on the furnace it starts and works all night maintaining the temperature I have set on the thermostat...
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Dec 14, 2012, 04:51 PM
    The reset button is a safety switch. If the furnace does not turn on in a certain amount of time it will go off on safety. This is to protect the furnace.

    Need more info. Type of heat, type of fuel, When was furnace last cleaned and serviced?

    Chuck
    gusholdem's Avatar
    gusholdem Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Dec 14, 2012, 04:53 PM
    Quote Originally Posted by creahands View Post
    The reset button is a safety switch. If the furnace does not turn on in a certain amount of time it will go off on safety. This is to protect the furnace.

    Need more info. Type of heat, type of fuel, When was furnace last cleaned and serviced?

    Chuck
    Oil furnace cleaned less than year ago
    gusholdem's Avatar
    gusholdem Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Dec 14, 2012, 04:55 PM
    Quote Originally Posted by gusholdem View Post
    oil furnace cleaned less than year ago
    The furnace does come on when reset button his hit.. I think you misunderstand question
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace will only come on if I hit the reset button runs till it gets to temp then [ 1 Answers ]

My furnace will only come on if I hit the reset button runs till it gets to temp theni have to hit the reset again to come back on anyone no why

Where's the reset button on my furnace [ 1 Answers ]

Electric went out while the furnace was in operation came on later and now the fan works, replaced the thermostat thinking that was it, wasn't, can't find a reset button

What is thermostat reset button for? [ 1 Answers ]

Where is the reset button on my furnace [ 1 Answers ]

a/c or heat won't come on and neither will the fan on the thermostat

Have to hit reset button on bottom of control box to get well pump to run [ 1 Answers ]

To get the pump to start I have to hit the rest button on the bottom of control box, the pump will then run as normal fully charging the tank until pressure vale kicks it off, it will run water for quite some time before pressure gets low enough to kick the switch back on but I have to reset the...

View more questions Search