Ask Experts Questions for FREE Help !
Ask
    Williams valley's Avatar
    Williams valley Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 13, 2012, 03:44 PM
    Sewer cleanout
    How do you replace a male plug/cover on an existing female cleanout that is not a perfect round anymore?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Dec 13, 2012, 04:39 PM
    Hi WV

    It would help me to answer your question if I knew the material the pipe and cleanout are made of, OK?

    Are we talking cast iron, galvanized metal, or PVC/ABS plastic pipe here?

    I can tell you that if you have metal pipes and are trying to install a cleanout then one option besides cutting-out/removing the old cleanout and installing a new one is to TRY to find a properly sized universal LEAD CLEANOUT PLUG (see image). Here, the lead cleanout plug (only available online or at a local plumbing wholesaler) is slightly malleable and you can CUT threads into them as you turn the plug into the cleanout... works pretty good.

    Another option might be to purchase a wing-nut type rubber plug... see image.

    Back to you...

    Mark
    Attached Images
      
    Williams valley's Avatar
    Williams valley Posts: 2, Reputation: 1
    New Member
     
    #3

    Dec 13, 2012, 07:43 PM
    Hello Mark,
    Thanks for the prompt answer.
    The clean out is PVC. It is 6" in diameter (female) and it is located in a concrete driveway (about an inch above the driveway). I bought a male plug but could not screw it because the existing female clean out is not perfectly round.
    Thanks again,
    WV

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sewer cleanout [ 5 Answers ]

How di I find my sewer cleanout in a older house?

Replacing a sewer cleanout [ 1 Answers ]

My drains backed up and the roto-rooter guy that came out determined that the problem was large tree roots blocking the sewer line outside the house. I have a cleanout right outside the front of the house that he snaked a camera down and said that there is another cleanout right near the sidewalk...

How to clean a sewer cleanout [ 1 Answers ]

How Do You Clean A Sewer Cleanout?

Sewer cleanout placement [ 2 Answers ]

First a little setup. This is for a septic system installation and deals only with the sewer line between the house and septic tank. Code and good construction calls for a sewer cleanout within a few feet of the foundation, where the pipe exits the house, so you can snake the line between the house...

Sewer cleanout [ 3 Answers ]

Hi, we had a backup and plumber had to use roof vent to clean it out. I have looked all over for a cleanout and have not located it yet, and don't know if we have one or not. I read about putting snake down toilet and using metal detecter but have none of those things. Is there a way I might find...


View more questions Search