Ask Experts Questions for FREE Help !
Ask
    THUYAP10's Avatar
    THUYAP10 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 11, 2012, 08:50 PM
    Rheem rgda 075cer furnace pilot is lit but burners will not come on
    I have tried turning the unit off and relighting the pilot and the burners will still not come on

Check out some similar questions!

I have an armstrong sx ultra 80 gas furnace the pilot is lit but the burners will no [ 4 Answers ]

I have an armstrong sx ultra 80 gas furnace the pilot is lit but the burners will only come on when I take the door off till they light and then I put the door back on once the temp reaches the level on the thermostat it will shut off it will not come back on when the temp drops until I go and do...

Old Armstrong Furnace. Pilot lit, burners won't [ 4 Answers ]

Yesterday AM the breaker for the furnace kept tripping. I opened it up and noticed that the wire running to the limit screw on the limit switch had melted to the furnace. I removed the wire and ran a new one. Now the fan runs but the burners won't. Any ideas?

Furnace burners will not turn on, but the pilot is lit. [ 6 Answers ]

I turned on the heat for the first time this season and no heat came out. I checked the furnace and the pilot was out. I lit the pilot and it stays lit (been on for over a day now.) I tried the heat again and still nothing. So, the furnace is getting power, the fan works when "ON." The pilot...

Gravity furnace pilot is lit but burners aren't working [ 14 Answers ]

I have two large gravity heaters - the kind with asbestos octopus ducts - in my basement. They were made by Pacific Gas Radiator Company (Huntington Park, CA). The pilot lights but the burners do not fire. I try to clean them out each year, but I have the problem repeatedly. On the other unit, the...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.