Ask Experts Questions for FREE Help !
Ask
    yancman's Avatar
    yancman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2012, 02:59 PM
    Goodman heater will not fire up
    I have a goodman heating & air unit. The heater will not turn on. When I flick the switch for heat the exhast fan turns on, and that all. I've check the breakers, turned the a/c on and it works fine (blower come on). Also turned the switch for the fan from auto to on... blower comes on. Just not on the heater.
    repairman_red's Avatar
    repairman_red Posts: 37, Reputation: 1
    Junior Member
    		  
    #2

    Dec 10, 2012, 07:14 AM
    Does the igniter glow? Is the LED in the blower section flashing and if yes then how many flashes?

    Most likely the igniter has gone bad or gas is not touching the igniter. Whatever you do DO NOT touch the igniter with your hands... that makes them break. Let me know the answers to the above questions and we can get this problem answered more clearly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman heater will not fire up but inginter does come on [ 0 Answers ]

Gas is coming on and the igniter but will not fire up

Goodman GDS80904BNA won't fire [ 0 Answers ]

I have a Goodman GDS80904BNA with electronic ignition - I replaced the igniter and cleaned the sensor rod, but it still won't ignite, even though the blower runs. The main fuse and the 3-amp fuse on the control panel are not tripped - the red error LED is burning steady - no flashes. Do I need to...

Goodman GMPN won't fire [ 3 Answers ]

Trying it for the first time this year, unit is 9 years old. The furnace blower keeps running but there's no fire and after a few minutes it cuts off. LED is solid. Could the ignition switch be shot? Thanks.

Goodman Furnace Issue - Heater won't work, no fire [ 1 Answers ]

My Goodman heater won't fire up. When I turn the heat on, the sequence of events: 1) Small fan at top section turns on. 2) Heating element turns on, bright red. The system sounds like it is trying to turn on. 3) Then the bright red goes off. The fire does not light. The fan does not start 4)...

Goodman Furnace won't keep fire up [ 2 Answers ]

I have a Goodman GMP100-5, age uncertain, maybe 6 years. The burner fired up for 7 seconds or so and turned off. After 3 cycles it went off. The status light blinked once. Since the gas fired OK. I replaced the flame sensor. It still does the same thing after the flame sensor replacement. It is a...

View more questions Search