Ask Experts Questions for FREE Help !
Ask
    daddypa's Avatar
    daddypa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2012, 03:24 PM
    Dropped hampton bay remote receiver
    I dropped Hampton Bay remote and fan and light dimmer stopped responding. Replaced the remote with a new one and now fan works but light dimmer turns the lights on to one low dim setting. Any help will be appreciated.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Dec 9, 2012, 08:05 AM
    It sounds like you have a bad remote. These remotes can be fixed if the problem is due to spilled liquids, the most common problem, but when the chip is bad you have to replace it. I just replaced a remote that went out suddenly, the first time it has ever happened to me. Make sure to clean any dust off fan that may block the infra-red signal.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay remote receiver [ 7 Answers ]

We just installed a receiver box on our fan. Everything works except we can not get the remote to work with the lights, it only work with the fan. What do we need to do? I know some wires must not be where they need to be

Trying to change out the remote control receiver on a Hampton Bay fan [ 1 Answers ]

Need to change out the receiver for the remote control--steps?

Hampton Bay Fan 9T remote receiver? [ 4 Answers ]

Hello, I have surfed and surfed with no results. I have the Hampton Bay digital ceiling fan remote and it does not work anymore. I think it is the receiver that mounts at the fan. Any ideas on where to get a new one? Thanks so much for any replies...

Hampton Bay Ceiling Fan Remote Receiver [ 12 Answers ]

Have a Northport III 52" ceiling fan and can't figure out where to place the remote receiver. The installation manual says to place it in the upper canopy, but there's not enough room and after installing I can't secure the canopy. Any ideas on what I'm doing wrong?:confused:

Hampton bay 52A4h4L remote receiver location [ 1 Answers ]

Hi, Where can I find the Hampton bay 52A4h4L remote receiver? I looked at the canopy, it's not there. I couldn't operate this fan/light using the remote, of course there is no pull chain for this model. Also, once I find the remote receiver, if it's not a universal model, can I replace it...

View more questions Search