| 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Sink drain leaking, even with water supply shutoff and sink empty
 [ 0 Answers ]
 My bathroom sink drain is leaking, I had planned on replacing the seals and washers under the sink, however this morning the leak got worse. This is almost a full day since water was shut off to sink and sink is empty. Why would this be? I am afraid if I undo the drain I am going to have water... 
Relocating Sink Drain/Vent to Dedicated Stack Serving Kitchen Sink & Dishwasher
 [ 3 Answers ]
 I am relocating an upstairs vanity sink from one wall to another (also going from single to double bowl). Rather than relocate the drain and vent pipe, I am hoping that I can tie into a 1-1/2" copper vent pipe that is located right behind the vanities intended location. The copper vent pipe is from... 
Hooking a Utility Sink in basement to Kithcen sink drain
 [ 2 Answers ]
 I'd like to install a utility sink in the basement and have attached a drawing illustrating the current piping and proposed attachment. Basically, the kitchen sink drain goes directly into a drain in the basement floor via a 1-1/2" steel pipe, which is tied to the sewer system. I'd like to put a... 
Extending utility sink drain for bar sink
 [ 2 Answers ]
 I have a utility sink in my walk-out basement - that sink's 1.5 inch drain connection is approx. 18" above the floor, into a two inch horizontal run. This 2 inch horizontal PVC runs about 3 feet, then connects to a main 3" DWV. I would like to add a bar sink, set into a standard height (36")... 
Kitchen Sink/Laundry Sink Drain Vent Non-exist
 [ 3 Answers ]
 The set-up from kitchen sink leading down to drain to basement: 1. Kitchen sink - (R side) - connected to a P drain I think you call it -PVC-, connected to a "metal" T, which has a Studer vent gizmo attached to the top of it, then draining into a metal pipe straight down to the drain in the... View more questions Search 
 |