Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New electric range won't sot flush against wall old gas pipe sticks out too far
[ 0 Answers ]
The old gas pipe sticks out from the wall. The pipe comes out of the wall then has an elbow with a valve on it. That is where the flex hose was attached to the stove. We have an electric range that won't sit flush to the wall because the valve and elbow are outside the wall and in the way. Can...
Outdoor wall flush mounted box requirements
[ 1 Answers ]
I have a concrete block home with EMT pipe. I would like to install a flush-mounted outlet on an outdoor wall by passing a pipe from an adjacent indoor outlet. Can I use a standard EMT outlet box with a standard mudring followed by reapplication of stucco, paint, and a liquid-tight faceplate? ...
Proper 220V wall outlet for range/oven
[ 4 Answers ]
I moved a 200V outlet from one side of the kitchen to another. I bought a new range/oven. When I plug in the range/oven, the rang elements work properly, but the oven will not turn on or the clock runs. Does it look like I rewire the 220V outlet incorrectly? If I get a voltmeter, what reading I...
Flush to wall copper to pvc
[ 1 Answers ]
I need to replace the trap under my bath sink. The copper pipe is flush with the wall.Can't solder or add a fitting. The pvc fits somewhat snugly into it. How can I get a good seal to the pvc trap. Maybe a special glue?
Securing toilet---flush through wall
[ 2 Answers ]
My toilet started seeping a bit, so I removed the toilet so I could get to the wax seal. In the process, one of the bolts anchored in the concrete floor snapped off level with the floor. This toilet drains through the wall rather than through the concrete floor. It was held in place by one floor... View more questions Search
|