Ask Experts Questions for FREE Help !
Ask
    brstp's Avatar
    brstp Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 28, 2012, 08:41 AM
    Electrical questions free
    What size and type wire do I need to go from the meter to the service point for a 2oo amp residential service
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Nov 28, 2012, 11:33 AM
    #2/0 AWG Copper or #4/0 AWG Aluminium
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #3

    Nov 28, 2012, 02:08 PM
    Don covered the sizes, the type depends on how you are running it. Could be SEU cable, could be conductors in conduit.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Free electrical questions [ 6 Answers ]

Can you have a 480 volt primary transformer feed in the same pipe with 120 volt Branch circuits. Can you share a under ground vault with 480 volts and 120 volts arriving and leaving in separate conduits.

Free Electrical Questions [ 1 Answers ]

I would like to know the cost of installing a single lite switch a single receptacle in afinished wall made of lathe and plaster. Going to my basement. Wire usage would be about 40 ft. my box is in the basement the sw is going to 3 small can lites over a bar a box was built for them. The receptacle...

Free Electrical Questions [ 3 Answers ]

On an apliance with a plug having 1 fat prong and 1 not so fat,the fat one would go to the white wire right I hope

Free Electrical Questions [ 1 Answers ]

How come they used to ground one leg on a delta system in some applications.

Electrical questions free? [ 9 Answers ]

Why does an afci trip when the neutrals of two different afci circuits are tied together in a switchbox?


View more questions Search