Ask Experts Questions for FREE Help !
Ask
    jTXboy's Avatar
    jTXboy Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 28, 2012, 08:30 AM
    Quiet partner 3
    The lock,clean,heatdry lights are all solid green not flashing. The machine will not respond or work. Is there a way to fix this?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Nov 29, 2012, 07:47 AM
    Look at these: https://dl.dropbox.com/u/8010163/Whi...ice_manual.pdf
    https://dl.dropbox.com/u/8010163/Whi...ishwashers.zip
    I suspect that the float in the tub is stuck in the up position, or another safety is tripped. Push normal then heat-dry, normal, then heat-dry. This will reset the dishwasher, but if a safety is tripped you will have to find it and reset it. Check your filter, too. When it stops up, it trips a safety.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Quiet Partner IV [ 1 Answers ]

When I try to use my Whirlpool Quiet Partner IV dishwasher, none of the buttons work except for the cancel/drain button. I even tried to get it to go into diagnostic mode, and that did not work either. I turned off the breaker for 30 minutes to see if that would reset it, but nothing. The...

Whirlpool quiet partner 111 [ 0 Answers ]

My whirlpool quiet partner 3 will not drain just installed one checked operation of unit empty now water sets at bottom of unit.am I doing something wrong thank you

Whirlpool quiet partner iii manual [ 0 Answers ]

Thanks for your help in advance... My dishwasher is only about 4 years old and will not drain. I have standing water in the bottom of the dishwasher and have even tried using the "drain" button on the control panel and that did not work. Any suggestions?

Quiet partner II dishwasher [ 4 Answers ]

Clean light flashing, won't wash or dry..

Filter in Whirlpool Quiet Partner iii? [ 1 Answers ]

My dishwasher has completely stopped cleaning the dishes... the "crud" that is redeposited on the dishes has reached an all time high... even if we rinse the dishes first. Is there a filter that can be emptied like in a clothes washer? We do not have the manual as it was the washer installed in...


View more questions Search