 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Peerless Purefire boiler is shaking
I have a Peerless Firefire 210 and after it responds to call for heat I see the input dropping to 1% and the motor sounds like it is stalling and the entire unit shakes. This happens reliably every 10-30 minutes.
Any ideas? |
||||
|
||||
|
If it is a Pure Fire here is the second version of the manual.
http://www.google.com/url?sa=t&rct=j...8FgxJ-t43UqKBQ I must ad that these are not your average homeowner serviceable units and you should call for ON SITE help since trying to repair one of these here by posting is all but impossible. From the sound of what you are saying it probably needs to be cleaned/serviced/with a fine tune adjustment. |
||||
|
||||
|
I will call my the appropriate repair folks but the one I had on Saturday had NO IDEA and wanted to do something radical with the air and vent pipes. I really need someone with experience with this unit
One more thing I noticed is that this shaking occurs only when the "Input" drops to 1%. It then shakes and then goes through the cycle. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Anyone have any experience with Peerless brand purefire boiler? I just purchased one to install in residential application. If anyone has used this brand,I'd appreciate the feedback. Peerless Boilers, Bally, PA, Heating, A/C, Water Heaters
We had a peerless purefire installed in the spring. Ever since the heat was put on we have enormous amounts of dust which seems to bother our breathing. Was it installed wrong by the plummer?
How about a home owner question, Power Problems ? During the recent power outage in MA, I had to power up my portable generator. That's when I found out how temperamental this unit is. This was this time I had to run this furnace of off the generator ( 1 year old) and unless I had the right...
My peerless purefire boiler makes a load bang on ignition... any ideas what the problem is on the very first ignition I don't have any bang but after that it gets pretty loud... check all the co levels and all is good
I have a Peerless Purefire boiler (80,000 BTU). The hoses (#1 in picture) that connect from the "combustion chamber" and "vent system", to the tank, leak. I have tried tightening the plastic clamps that come with the boiler, and even used metal hoes clamps, but nothing has worked. Is there a...
View more questions Search
|
