Ask Experts Questions for FREE Help !
Ask
    orzzy's Avatar
    orzzy Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 27, 2010, 01:09 PM
    My peerless purefire boiler makes a load bang on ignition
    My peerless purefire boiler makes a load bang on ignition... any ideas what the problem is on the very first ignition I don't have any bang but after that it gets pretty loud... check all the co levels and all is good

Check out some similar questions!

Peerless purefire boiler [ 11 Answers ]

Anyone have any experience with Peerless brand purefire boiler? I just purchased one to install in residential application. If anyone has used this brand,I'd appreciate the feedback. Peerless Boilers, Bally, PA, Heating, A/C, Water Heaters

Peerless purefire problems [ 6 Answers ]

I just read your post about your peerless boilers. Unfortunately I am having problems after only one year. I have the Peerless Purefire 110 gas fire. The unit will not reach set point temp and continually goes through "trial for ignition" cycles. After pulling the side cover off I noticed all the...

High temp switch popping on peerless boiler? [ 1 Answers ]

I have a 5 year old peerless stainless steel pinnacle gas boiler. I have a side arm heater and zone valve heating with two pumps. In the winter I have to partially close the bybass valve to force the zone valve heating to work. Every four days the high temp switch pops and I have to reset it. There...

Peerless Purefire [ 6 Answers ]

I have a Peerless Purefire boiler (80,000 BTU). The hoses (#1 in picture) that connect from the "combustion chamber" and "vent system", to the tank, leak. I have tried tightening the plastic clamps that come with the boiler, and even used metal hoes clamps, but nothing has worked. Is there a...

New Boiler makes pipes and radiators bang [ 1 Answers ]

Hi, Our 28i Junior Boiler was fitted, and when we have the heating on we get a banging very loud that "travels" if we turn the valve on the radiator - temporarily stopping then moving to the next one. We have bled all the radiators several times, without helping, a plumber who was doing...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.