 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas burner won't ignite
System is calling for heat. The draft inducer comes on, the hot surface ignitor gets red but burner won't light. I ohmed out the gas valve and it is good. I cleaned the flame sensor with soft sand paper.the IFC has a constant light on the board. What could b the problem?
|
||||
Check out some similar questions!
The plate in my furnace won't Light up only the pilot light is on
Furnace burner won't ignite only blows cold air,it has a electictic igniter
I have a small furnace that heats my garage and two rooms above my garage. Turned this furnace on for the first time this year and all it does is blows out cold air. Pilot is lit but it seems like the main burner doesn't ignite. Any ideas? Thanks, Gerry
I have a forced hot air Trane xe 80 furnace. Electronic ignition. At times the burner will not ignite. The fan motor runs and only cold air is coming out. If I turn the furnace switch off then on again, it will glow and then the burner will ignite. This could last for days, then it will do it again.
I have a 26 year old Friedrich gas furnace model GHA075NDC that the burner will not ignite. The pilot is lit and I can turn the fan on, but the burner will not ignite. Can anyone help me solve this problem?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
