Ask Experts Questions for FREE Help !
Ask
    Rodneyblan's Avatar
    Rodneyblan Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 16, 2012, 08:40 PM
    State select water heater won't light
    Replaced the thermo coupler still won't light.
    Good spark to. I can't even hear gas coming out when I push the pilot light switch down. Please help
    PJmax's Avatar
    PJmax Posts: 70, Reputation: 3
    Junior Member
     
    #2

    Nov 18, 2012, 08:15 PM
    You won't hear the little bit of gas that the pilot uses. The pilot will still light if the thermocouple was bad... it just wouldn't stay lit when you let go of the button. Make sure there is nothing covering the pilot area... like rust. I'm guessing that the service gas valve is turned on. If propane... is supply OK. Not low ? You can also try lighting the pilot with a match to see if the spark lighter has an issue.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State select water heater pilot light [ 3 Answers ]

We have a State Select Hot Water Heater (I don't have the model # was difficult for me to see). Our pilot light won't stay lit. It went out somtime Saturday afternoon. We were able to light it Saturday evening. It stayed lit for a while once it was lit Saturday night. The pilot light went out again...

State Select Gas Hot Water Heater - main burner will not light [ 2 Answers ]

My main burner will not light. After the hot water heater power cycles three times, the hot water heater shuts down and the following error code is displayed: 100110 which the owner's manual says is System Lockout Things I have tried: Repositioned the igniter assembly several times...

Can't find where to light pilot on State Select Water Heater [ 2 Answers ]

I am having a horrible time finding the Hot Water Heater pilot on a State Select Hot Water Heater.


View more questions Search