Ask Experts Questions for FREE Help !
Ask
    bllafla's Avatar
    bllafla Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 15, 2012, 07:41 AM
    Our faucets go from cold to hot and back again about 4 times before it stays the temp
    When we turn the faucets on, the water starts cold, then goes to hot, and back and forth again about 4 times before it stays the temperature that we want. Do you know what the problem could be?
    bllafla's Avatar
    bllafla Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Nov 15, 2012, 07:46 AM
    When we turn the faucets on, the water starts cold, then goes to hot, and back and forth again about 4 times before it stays the temperature that we want. Do you know what the problem could be?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My cold water faucets, in the back of the house, quit working [ 0 Answers ]

Single story house. Two bathrooms, backing to each other.Changed whole house water filter. Cold water faucets (sink and 1 shower) quit working. All other cold water llines work. One toilet works and the other does not. If I turn on hot water, and cold water faucet, toilet fills with hot water. I...

Can't adjust temp moen faucets [ 0 Answers ]

Installed new hot water heater,now my moen one handlebath faucet will only have only hot are cold water how to adjust this

Thermostatic Shower temp stays constant [ 10 Answers ]

Hi all, My thermostatic shower only has a constant temp which is just above lukewarm! Recently I had to replace the pipe to the shower head as I found the reason the pressure was poor and the shower was too hot was due to a leak in the pipe. Since fixing this however the temp has remained...

Heating element stays on at all times [ 1 Answers ]

I have a Maytag dryer model # LDE8200, the heating element stays on at all times. Is it suppose to do that?

View more questions Search