Ask Experts Questions for FREE Help !
Ask
    Arto Szabo's Avatar
    Arto Szabo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 7, 2012, 03:12 PM
    14/20RES troubleshooting
    This new Kohler LP gas generator (installed in January 2012) works for 2-3 hours and than it stops. Needs a new startup to get it going again. Very annoying to go out in the middle of the night.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Nov 7, 2012, 03:14 PM
    Call support. It is still under warranty and you should not mess with. Let them handle it. They are GREAT to deal with.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting [ 1 Answers ]

Furnace does not start in heating mode. Tranformer is humming and the furnace makesa click and the led light shines solid and then flashes 3 times. We replaced the pressure switch and the same problem exists.

Mtd troubleshooting [ 16 Answers ]

My Yard Machine manual states I have a 20 amp fuse mounted on the dash panal on the right side. I can't found it anywhere. Any suggestions?

Mtd troubleshooting [ 1 Answers ]

I have an MTD series 600 tractor with a 46" cutting deck. I just purchased a snow thrower, part nr 190-032 for the tractor. I ran into trouble with step one which is a detrerminate of Electric PTO vs Manual PTO. I have a manual PTO and the step one procedure is to locate the PTO Cable. It...

Troubleshooting the icm [ 4 Answers ]

Troubleshooting the icm

Second HD troubleshooting [ 1 Answers ]

Ok, here's the skinny... Intstalled my girlfriend's HD (Maxtor DiamondMax Plus 9 80GB ATA/133 HDD) onto my computer as a 2nd HD(slave). All jumpers are set correctly, all cables are correct (not the 1st time I've done this). Everything works fine, it's detected and I do have access to it. ...

View more questions Search