Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heat doesn't come on when thermostat calls for heat, changed thermostat and switch
[ 0 Answers ]
Changed thermostat and switch reset wires and worked for the weekend, until last night didn't turn on and I had to press the reset button what else could it be?
Instlld program thermostat, wrked fine heat all winter, now no heat, a/c or fan?
[ 4 Answers ]
We got a Lux Programmable TX9000a. It installed it in November and heat worked fine all winter. Today I tried to turn on A/C and it didn't work (it is 90 where we live). I tried looking at wiring and perhaps a mis-wired. I am not sure. I have 5 wires and I have two units outside (heat pump and...
Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat.
[ 4 Answers ]
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
House is cold even heat is on to 70 (thermostat)
[ 2 Answers ]
I have a 2 story house and about 20 years old. I recently bought this house. I do not know so much about to maintain properly. I have a delime that, when I put the thermostat to 70, the downstairs always get cold but the upstairs get hot. As long as the hot air comes from room vent, it feels...
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B - View more questions Search
|