Twinning error on 24volt

Check out some similar questions!

When ever I set the thermostat to heat or cool the transformer blows. I have installed a 2a fuse in line to protect the transformer after 2 cooked . I can switch on the fan and it works until I call for heating / cooling then everything quits. What would be the possible things to check? Thanks for...

Twinning error code (but only one furnace) [ 12 Answers ]

Hi, I just purchased a new control board and the istallation "seemed" very straight forward, i.e. hooking up the various wires from the old board to the new one. However, all I have been able to accomplish is to get a twinning error code, i.e. a rapid red blinking of the diagnostic light. Any...

Xenon twinning error 24v phasing? [ 0 Answers ]

Did a little trouble shooting but lost now unit runs fine until you try to set t-stat past 75 installed 5 years ago everything fine till now

24volt control for trane a/c [ 2 Answers ]

I just moved into a house (renting) and noticed the 24volt wiring for the trane a/c is not wired up. Would anyone know the correct terminals to connect the wires, red, white and green? I am assuming the red may go to the Y terminal and the white to the O, is green the ground? Or do I have that...

Twinning error, but no twin furnace [ 2 Answers ]

I have a problem similar to mednomann https://www.askmehelpdesk.com/heating-air-conditioning/furnace-failure-144953.html. I have a York furnace that was giving me a limit switch open fault, but the limit switch was closed. I have installed a replacement control board, but I am getting that...

View more questions Search

Check out some similar questions!

Add your answer here.